Skip to product information
1 of 7

5050 30LEDs WS2811 Pixel LED Strip Light 16.4ft Non Waterproof IP20

5050 30LEDs WS2811 Pixel LED Strip Light 16.4ft Non Waterproof IP20

The 5050 30LED WS2811 pixel LED strip light is full color LED for indoor and outdoor decoration.

  • 30LED WS2811 12V pixel LED strip the IC is fixed on PCB board - better heat dissipation and good price
  • Non waterproof IP20 LED strip light 16.4 ft. is easy to cut or add additional strips later - save your time
  • Dream color changing and more than 3000 modes - every night is different
  • High brightness LEDs - building full atmosphere
  • Working with smart control - voice control like Alexa, Google, Bluetooth, sensor control and mini remote control 
  • Different lead and connector on both ends - customize your idea
  • Simple and good quality anti-static bag - save freight and environmental protection
  • Waterproof customized - IP65, IP66, IP67, IP68


Model: FCL-5050RGBIC-30-100-2811
Lamp Body Material: Copper
Voltage: DC 12V
Power: 7.2W/M
Luminous Flux: 2000MCD
IP Rating: IP20
Weight: 0.14KG/bag

View full details

Quick Guides

Choosing the right LED strip

LED strip light is available in a full range of colors, such as red, green, blue, yellow and pink, as well as a variety of temperatures, including cool, neutral, and warm white. If you don't want to stick to just one color, you can choose color changing strip lights instead. LED strip also comes in different wattages — usually from 5 watts to 25 watts — which determines the brightness of the lights (measured in lumens). So, there's a wide range of LED strip lights that will help you achieve the look you're going for.
There are different waterproof IP grade of LED strips, in IP20, IP65, IP67 and IP68. The IP20 is less weight and smaller volume, means it is better for shipment. The popular IP65 is protected with glue on surface of LED strip, but easy to cut or add additional. The IP67 with glue tube covered, it will consume some strong light from LEDs, friendly with your eyes. The IP68 is the special one for outdoor even though put the light in water.

The way to power the LED strip

Most LED strip lights can be powered by the main power supply, you'll need to install a driver to provide stable voltage and current.
The RGB and RGBIC need a controller for control the color changing, or mobile APP control. (The single color is available with a dimmer/mini controller if you want to adjust the brightness or simple modes)
Also some customers to power the light by USB or car connector, battery and solar panel and so on.

How to connect LED strip lights to main power supply

  1. Connect the LED strip to the connector wire by inserting the end of the tape into the clip on the wire, being sure to match the red wire with the '+' sign on the tape and the black wire with the '-' sign. For RGB or RGBIC LED strip you have to add a controller between LED strip and power supply.
  2. Firmly press the back of the connector clip to close the clasp. You may have to remove some of the backing strip on the adhesive side.
  3. Remove the adhesive backing of the tape and firmly press it onto the surface of your choice, whether it's your ceiling, wall, or underneath a counter.
  4. Connect the other end of the connector cable to the driver. Alternatively, you could try our range of ready to connect and easy to use LED strips. These light strips come with a pre-attached jack that directly plugs into a corresponding driver.
  5. Plug the driver in to the power supply and switch the mains power on. (do not let the LED strip work on a reel)

How to connect multiple LED strip lights together

If your project requires LED strips that are more than 5 meters long, you can easily connect multiple strip lights together. However, linking them together with a connecting wire will cause a voltage drop as the current runs from one light strip to the next, and your lighting will get dimmer as it travels down the circuit. Instead, you'll need to connect all of your LED strip lights to the driver separated by connecting one end of each tape to the device using an LED connector. Alternatively, you could use a cable splitter which works in the same way, but only requires one wire, which is best for drivers with only one outlet. Both of these methods will ensure there won’t be a drop in voltage.


LED strip light for backlight, room, house and outdoor

LED strip backlight

LED strip for backlight

Fix the LED strip light to your TV or computer. Single color or full color LED strip lights controlled by mini controller.

LED strip for living room

LED strip for room

The full color LED strip in living room, be controlled by music controller, dancing with lighting.

LED strip for house

LED strip for house

With an LED strip around the house, controlled by remote controller, set the beauty at home.

LED strip for outdoor

LED strip for outdoor

Put the waterproof LED strip in the pool, control the color as you like.